Comtek AT-216 Manual do Operador descarregar pdf (Página 8)

Page 7

Battery Charge

To charge the M-216 with the NBC 9-2C charger:

1. Make sure that a Ni-MH or Ni-Cad rechargeable battery is used.

(Alkaline batteries must not be charged with the NBC 9-2C charger.)

2. Make sure the M-216 is turned OFF.

3. Note that the red charging indicator on the NBC 9-2C should turn on

when the charger output cord is plugged into the AUX input

receptacle on the transmitter.

4. Charge the battery for 12 hours to allow 12 hours of operation

when Ni-MH battery is used. Note that immediately after charging, the

battery will be warm. This is normal and not cause for alarm.

5. On stored COMTEK units, periodically open the battery compartment to

check for battery leakage. If a battery is leaking, it must be discarded,

and the battery compartment must be cleaned or returned to COMTEK’s

service department for repairs.

IMPORTANT

M-216 OPERATING INSTRUCTIONS

1 2 3 4 5 6 7 8 9 10 11 12 13 14

Sem comentários

Comtek AT-216 Manual do Operador Página 8